Your cart is empty.

Welcome to Cindys Fabrics. We are so HAPPY you stopped by!!
Our Specialty is "I SPY SQUARES"

We carry many specialty fabrics and new ruffle fabrics
We provide special orders, such as duplicate or squares for boys or girls.
To discuss what you would like call or email at

Thanks and Happy Sewing
See our new ruffle fabric

this item is out of stock


I was inspired to create these bags for my kids who are constantly asking me for plastic bags to put toys into. I'm big on eco-friendly thinking and decided they needed something more reusable than a plastic sandwich bag. So, not only are these very cute, but very functional and environmentally friendly too! (NOTE: this kind of vinyl is not food-grade and I wouldn't recommend using these bags for food!)

Here's what you need:

2 pieces of clear vinyl - 6.5" x 7" (I used a mid-weight, not sure what gauge)
2 pieces of fabric - 6" x 7"
3" piece of hook and loop tape (aka velcro)
1/2" double fold bias tape (store bought or make your own, good tutorial here)

I found that making a template and drawing a pattern was an easy way to cut the vinyl. I tried just cutting with my cutting mat and ruler and it kept slipping around.

Next, take your fabric and fold it in half, matching the shorter sides, so you have a rectangle that is 7" wide by 3.25" tall. Press.

Open, and fold down the long sides 1/2". Press.

Open up the folded fabric and center the hook and loop tape about 1/2" from the top. Sew in place making sure you sew through only 1 layer of fabric ie. you should be able to re-fold the fabric and not see the seam lines on one side.

Open up folded fabric (bag top) and align raw edge with the 7" side of a vinyl piece. Sew across, with seam allowance just short of 1/2".

Turn so that the seam allowance and raw edge of the vinyl is sandwiched between the fabric top.
Topstitch along the top and bottom.

OK, now grab your bias tape, we're almost done.

Take one end of the bias tape and fold the edge to the inside. Press, refold, and press again to create a finished end.

Starting at the top end (fabric end) of one side of the bag (sorry, I didn't get a photo of this part), sew all the way down to the bottom.

When you get to the bottom, turn the bias tape 90 degrees as pictured.

Fold the tape over again and create a mitered corner. Sew along the bottom and repeat for the next corner.

When you get to the top of the bag, cut the tape and make a finished end as you did at the start. Just make sure you leave enough bias tape so that when you fold the end, it still comes all the way to the top.

Done! Fill with toys and enjoy.


Price: $0.00


Your opinion is important to us...tell us what you think!

Be the first to review this product!